Acerbis Endurance-X Handguards Spacer F / Yamaha Tenere 700
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The standard spacer is garbage and will damage the powder coating on your handebar (and I dropped and lost one).
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 12
- Makes
- 0
- Views
- 305
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The standard spacer is garbage and will damage the powder coating on your handebar (and I dropped and lost one).
Heres one that wont!
Printed in TPU laying flat, this one can be easyli installed and works just as well.
It does fit on the Tenere 700.
But might on other motorcycles too, if:
Install everything else and see where the clamping block wants to sit on your bar.
Measure the diameter right next to it, if its 25 & 26mm, it will fit.
If its not that, but still 1mm difference between the two measurements, itll work. But you might have to trim it to length.