1 / 5
Low Rider CNC X Belt retainer and tensioner — zdjęcie 1
1 / 5

Low Rider CNC X Belt retainer and tensioner

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I had issues when cutting circles.. they were squashed in the X direction since the belt didn't have enough tension. I…

Ocena
0 / 5
Polubienia
1
Pobrania
13
Wydruki
0
Wyświetlenia
190
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

I had issues when cutting circles.. they were squashed in the X direction since the belt didn't have enough tension. I found the tension hard to adjust with zip ties.. so I made this.

Edit - Added version with 4mm bolt hole I think this is better than the original 3mm hole.

Print Settings

Resolution:

0.25mm

Infill:

90%

Category: DIY

Tagi