1 / 5
Low Rider CNC X Belt retainer and tensioner
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I had issues when cutting circles.. they were squashed in the X direction since the belt didn't have enough tension. I…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 190
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
I had issues when cutting circles.. they were squashed in the X direction since the belt didn't have enough tension. I found the tension hard to adjust with zip ties.. so I made this.
Edit - Added version with 4mm bolt hole I think this is better than the original 3mm hole.
Print Settings
Resolution:
0.25mm
Infill:
90%
Category: DIY