Counting matching models…
Updated LowRider CNC v4, here, https://www.printables.com/model/1034840-lowrider-4-cnc This is a full sheet capable CNC router. Size is up to you within reason, tool you use, control board, firmware, and end use is also up to you. I am…
Welcome to the LR4, the LowRider CNC v4, AKA the most productive you can be while still scrolling on your phone. Let the robot do your dirty work while you scroll away and keep an eye on it working. This is a full sheet capable CNC…
Tool mount and dust shoe for the Makita 700 series palm router or the Sienci AutoSpin T1 and a 70mm OD or less vac hose. PETG or better if you are concerned with heat. PLA works for most routers, some new ones seem to be hotter than the…
Print at 30%+ infill, fits ~48mm OD Vacuum hose. Vacuum hose gets a cable tie on the upper tool mount and one to the top of the core. It can take a bit of muscle to get the hose zipped in initially but it will soon conform to the curves…
this is a low profile LED COB strip mod for the Bambulab X1C and X1 printers. This prints in four pieces and is securely held together with 4ea M3x16 screws. I recommend this kit.…
Easy print LR4 specific Jackpot CNC Control Box. 6 Qty - M3x10mm hold down the board and lid. The optional Fan can be a 5015 (2 - M3 x 20mm) fan or a 5010 fan (2 - M3 x 15). Voltage should match your board input and wired directly to…
EDIT #2: 🙏 PRETTY Please with a 🍒 on top, comment if this model is use useful 🌟 or useless 💩. I want to keep, improve, or just delete this model if it's causing problems for your build. Cheers! EDIT: 🙏Please share Comments/Makes…
Quick heads up: These remix designs were somewhat “intended” for the case being positioned on the X-max end (right side) of the LR3 gantry. If you are planning for placing it on the X-min (left side), then the only concern with simply…
Design purpose: My dust collection is from the ceiling so I had a need for a drag chain or some type of cable management. This seemed like a good fit. Printing: Print as oriented. Supports used on the lower bracket. (zip tie bracket as…
DeWalt 611 Mount and removable dust shoe for the LowRider 3 CNC. Print at 30%+ infill, fits ~48mm OD Vacuum hose. Vacuum hose gets a cable tie on the upper tool mount and one to the top of the core. It can take a bit of muscle to get the…
Here is the Makita 700 series Fusion 360 CAD files, you can edit this one or back it up to get the raw block. https://a360.co/3vbUQFX Step files, for other CNC programs.
This is unofficial, not needed for a functional LowRider 4, and offers primarily cosmetic (aesthetic) benefit (for the most part; the “tie downs” do have some zip tie slots that could be used to help with wrangling wires, and the back…
Tool mount and dust shoe for the DeWalt 660 series palm router and a 70mm OD or less vac hose. PETG or better if you are concerned with heat. PLA works for most routers, some new ones seem to be hotter than the old ones though. Best to…
LR4 Fancy covers inspired by Peter H, bitingmidge! Here is the beginnings of a fun mod these are just to tidy up your LR4 and let you add some of your own flair, add a logo or just use a fancy infill with no top and bottom layers! I…
Note: Several of my designs for my CNC plasma rig are available here for free, and several others are exclusively for my supporters on Patreon that support for any amount, even if only a dollar a month.…
Update: New as of January 17, 2024: uploaded the new “Universal Slope-ie Ramp-ie Thing” (to glue onto the bottom of the shoe body). Full details below, or read about it on V1E forum . This short video explains all about the new “Bubble…
Easy print LR4 specific SKR Pro Box. TFT35 E3 V3 case , and case clip available. 6 Qty - M3x10mm hold down the board and lid. The optional Fan can be a 5015 (2 - M3 x 20mm) fan or a 5010 fan (2 - M3 x 15). Voltage should match your board…
Tool mount and dust shoe for the Kobalt palm router and a 70mm OD or less vac hose. PETG or better if you are concerned with heat. PLA works for most routers, some new ones seem to be hotter than the old ones though. Best to print both…
This allows use of my earlier kinematic accessory tool mount on the awesome new LowRider v4 CNC . Here's an old-yet-helpful video I made about the earlier version (which was for LowRider v3): This whole deal is an adaptation of a Maxwell…
This remix is so that a 2.5" vacuum hose fits and can be attached to the LowRider 3 (instead of ~48mm as in the original parts). I worked hard to match the style and function of Ryan's excellent original work, with only the needed change…
AKA “Hidden Belts Mod” AKA "LR3 Superstrut-encased Y belts" New v2 for LowRider v4: NEW as of October 6, 2023: now either or both Y belts can be hidden. Initially I only hid the Y-max belt (non-rail side) as that's the one I really needed…
This remix was requested by Stefan Raatz , who desired a case for holding an SKR 1.4 Turbo (instead of SKR 1.2 Pro), as well as a Raspberry Pi 4 model B. Quick heads up: These remix designs were somewhat “intended” for the case being…
NOTE: LINKED PRODUCT CHANGED HOLE SPREAD Kudos to V1E forum member Pebble who gave me the heads up that the makers of the drag chain seem to have modified their design. My mount hole spread distance was 9.2mm, but the chain product…
HEADS UP: A new version compatible with LowRider v4 is now available. Get it here . Here's a helpful video I made about this: This is an adaptation of a Maxwell Kinematic coupling . You can read about that here:…
Note: Several of my designs for my CNC plasma rig are available here for free, and several others are exclusively for my supporters on Patreon that support for any amount, even if only a dollar a month.…
This remix was requested by Miguel Arellano , who desired a 75 mm extension of an existing control box's lid and base, in order to house a Raspberry Pi 4 model B, so he can run Octoprint. Quick heads up: These remix designs were somewhat…
NOTE: There is now a new, updated version of this: LowRider v3 CNC - Tool-less Quick-Change Accessory Holder - supports laser, drag knife, pen, etc This is a remix of several prior iterations — originally designed for LowRider 2, now…
This can give a very loose hose a bit of a lift to keep it off of your belts, or you can secure your hose to it to keep all the extra weight of the hose and power cords off your moving gantry.
Huge thanks to Ryan of V1 Engineering, the Generous Genius, for sharing his wonderful machine designs with the world. This is a remix set related to the amazing LowRider v4 DIY CNC . For orientation on what is meant by “front” of the…
OVERVIEW These fenders/covers were developed in the course of building my Lowrider3 CNC from V1Engineering . They do not improve the operation of the Lowrider3 in any way, but if pretty is your thing perhaps you can convince yourself that…
Quick heads up: These remix designs were somewhat “intended” for the case being positioned on the X-max end (right side) of the LR3 gantry. If you are planning for placing it on the X-min (left side), then the only concern with simply…
NEW VERSION HERE - https://www.printables.com/model/204709-lowrider-3-cnc OLD------ Full sheet capable CNC router. 1"OD rails Information will be over here, https://www.v1engineering.com/lowrider-cnc/ This new version has less parts, less…
NOTE: Newest v2.0 of this model is now available - click here. NOTE: This is v1.1. If you were looking for v1.0 - click here. Note: As of Nov 16, 2023 — in addition to the earlier remix changes, today I added SVG files for engraving the…
Update: New as of January 17, 2024: uploaded the new “Universal Slope-ie Ramp-ie Thing” (to glue onto the bottom of the shoe body). Full details below, or read about it on V1E forum . The new part was originally only available on the…
Quick heads up: These remix designs were somewhat “intended” for the case being positioned on the X-max end (right side) of the LR3 gantry. If you are planning for placing it on the X-min (left side), then the only concern with simply…
As shown and discussed in this video: As described in the video, attached are both printable files and editable SketchUp files. This content was previously exclusively for supporters on Patreon, but I did not care for the Patreon business…
Heads up: There is an all new KINEMATIC version of this now, available here: https://www.printables.com/model/484825-lowrider-v3-cnc-kinematic-tool-less-quick-change-a NOTE: This version (3.1) was published May 4, 2023. If you downloaded…
Note: Several of my designs (and remixes) for my CNC plasma rig are available here for free, and several others are exclusively for my supporters on Patreon that support for any amount, even if only a dollar a month.…
If you have the problem with the front y belt mounts that they cannot withstand the pull of the belt and the upper part pushes out of the lower part, try this one-piece mount. The size of the holes are the same. If you now have the…
NOTE: This is v2.0. If you were looking for v1.0 or 1.1, click below: v1.0 v1.1 New in this version: The main new option here is the keystone jack slot in the base. This can be used with, for example, an ethernet jack for quick connect /…
LowRider v4 CNC - Tie Downs to secure 24v Power Supply (AC-DC) to lower strut plate of gantry. This is the 24v power supply I purchased from Ryan at v1e.com … Print as oriented. No supported needed. I pre-drilled and used M3 screws, but…
This is made to go with the LowRider v3 CNC - KINEMATIC Tool-less Quick-Change Accessory Holder - supports laser, drag knife, pen, etc (v4.1) . NOTE: July 28, 2023 — Consider adding some kind of spacers (could be washers or printed…
Split YZ plates for printing on smaller beds like the Ender 3 Pro. The intent here is to print these plates, join them with some type of strong 2-part epoxy, and use these temporarily on the LowRider 3 CNC to mill final YZ plates out of…
Your CNC can be a very detailed plotter. You can use giant marker or ultra fine tipped gel pens. The smaller the tip the slower you should move as not to burn out the tip. The wishbone suspension lets the pen move. Smaller pens should…
Printed in BambuLab's PLA Tough Vermilion Red, default settings for 0.20 mm Standard except 10% Sparse Infill Density and No-Brim. The FreeCAD 0.21.1 document is included for your remixing pleasure…
My Version of the Jackpot and Power supply Case for the Lowrider V4 from V1 Engineering https://www.printables.com/model/1034840-lowrider-4-cnc For the Power supply i'm using this 24V 120W one from Aliexpress:…
The hose holder hook easily catches a hose that is not falling into place perfectly. The “Shorty” part lets you cable tie your hose in with the perfect rotation to keep things moving right. The shorty part on the end lets you stretch the…
Makita 701 Tool Mount and Dust Shoe for the LowRider 4 CNC Modified to fit 40mm vacuum hose No supports needed
Quick heads up: These remix designs were somewhat “intended” for the case being positioned on the X-max end (right side) of the LR3 gantry. If you are planning for placing it on the X-min (left side), then the only concern with simply…
This remix was commissioned by a fellow V1E maker, Deadlystrike (username on Printables). Also, this listing's lid got remixed without the hold on top for TFT, as requested by a fellow V1E maker, @Mike_2205479 :…
!!! Bitte verwendet den Remix V1, in der alten Version wurde in einem Durchmesser immer ein Crash produziert !!! Schönen guten Tag Das ist ein REMIX von der Original Lowrider V3 YZ Plate back, um Sie auf den MK3S+ Flach zu drucken, und…
NEW VERSION HERE - https://www.printables.com/model/204709-lowrider-3-cnc Full sheet capable CNC router. 25mm OD rails Information will be over here, https://www.v1engineering.com/lowrider-cnc/ This new version has less parts, less…
LowRider 3 - hose-hanger modified for 2.5" vac hose. This part was designed to accompany another LR3 remix of mine: the LowRider 3 CNC - Makita 700 Series Mount & removable dust shoe - REMIXED FOR 2.5" HOSE If you plan on using my 2.5"…
These extended endstop switch mounts replace the stock ones included in V1 Engineering's awesome LowRider v3 CNC . They enable and additional 6mm of vertical adjustment for microswitches with differing lever types.
If you also have the problem that your hose hanger holder broke off as shown in the picture, try this reinforced version. To get even more stability, the region around the hole can be printed with 100% infill.
I've building a Lowrider2 MPCNC on my YouTube channel Teaching Tech. I attempted create dual endstop auto squaring with the sensorless homing of the TMC5160 with SKR V1.3 but it wasn't quite suited to the application. I found a simple…
These parts are custom modifications to my Lowrider3 CNC from V1Engineering . This cable tray came about because my “ LOW RIDER 3 FENDERS ” made the original cable tie points inaccessible and I needed a way of keeping the cables neat and…
This dust shoe fixes two of the main problems the original one had: very slight rattling as well as not sucking up all the dust when planing MDF or cutting acrylic. The dust shoe features a small gap for thin PVC or similar material, the…
This video not only shows how these laser crosshairs are installed and work on my DIY plasma rig, but also details how I designed these holders from scratch — from start to finish using SketchUp (free 2017 version, the last free version…
Heads-up: There's a new version of this: v2.3 — The only change in that remix was to make a bidirectional version of the cradle. Works no matter which side of the gantry you attach it. — Get it here:…
Pimp your V1E Lowrider 3 with a blinging grill, complete with measurement markers, and no cut zones. Originally based on Jamie's Strut generator script. Usage instructions, and latest files, available at…
New Version 1.1 Note: In September, 2023, a fellow V1E maker ( @steved on the V1E forum ) needed a little bit of adjustability on the location of the right-side belt-tensioner+endstop mounts, and so I made a v1.1 remix of this design ,…
This is made to go with the LowRider v3 CNC - KINEMATIC Tool-less Quick-Change Accessory Holder - supports laser, drag knife, pen, etc (v4.1) . Here's a helpful video I made about this: OTHER COMPATIBLE TOOL HOLDERS INCLUDE: NEW…
This is made to go with the LowRider v3 CNC - KINEMATIC Tool-less Quick-Change Accessory Holder - supports laser, drag knife, pen, etc (v4.1) . Here's a helpful video I made about this: OTHER COMPATIBLE TOOL HOLDERS INCLUDE: NEW…
Please watch this quick video which explains the purpose, and shows installation, etc. Print info: Print as oriented. Prints without supports I used my standard default of 0.3 layer height on a 0.6 mm nozzle. However, a 0.2 or 0.1 layer…
Note: There is an updated listing with a newer version of this remix: https://www.printables.com/model/415298-lowrider-3-cnc-three-remixes-of-rail-blocks-181-mm Also note: Several of my designs for my CNC plasma rig are available here for…
This model was made possible by AMB by providing the CAD files for the router so I was able to work with a boolean substract and make a mount that is a perfect fit. The top part should be printed oriented on the top. I left it in the…
INFO: v2 online to reduce collisions with PTFE Tube while printing bigger Parts! This is a Anti Glare Shield Upgrade for "THE BEST BAMBULAB X1C AND X1 LIGHT UPGRADE MOD - X1C LOWRIDER COB LED SYSTEM" I like the Model from @TheLightSpeed…
LowRider 3 CNC control box case for MKS TinyBee Also fitre 2 3030 fans (inlet/outlet) for cooling
64 impala, 3 wheel motion Category: 2D Art
See here: https://forum.v1e.com/t/custom-lr3-strut-contest/39367/151 Make sure you download all files. This is necessary for the logo to show correctly. Changelog: V3 - More fine tuning V2 - Updated design to be symmetric
NOTE: Newest v2.0 of this model is now available - click here. NOTE: Newer v1.1 of this model is now available - click here. LowRider v3 CNC: new Jackpot board getting its heat sinks installed: Just finished my remix work on a Jackpot…
This clip is made to fit the LowRider v4 CNC and the TFT35e3v3 case . It pairs very well with the SKR pro case .
Note: Several of my designs for my CNC plasma rig are available here for free. I had created a couple of different remixes of the LowRider v3 rail blocks (Y rail mounts), one for my router based LR3 (#1 — 23.4 mm), and another one for my…
The original was redesigned so that the shoe is attached with magnets.
This is made to go with the LowRider v3 CNC - KINEMATIC Tool-less Quick-Change Accessory Holder - supports laser, drag knife, pen, etc (v4.1) . Here's a helpful video I made about this: OTHER COMPATIBLE TOOL HOLDERS INCLUDE: NEW…
Ciao, this is a mod I designed when I took interest in the speedbenchy #speedboatrace Short video of it working: https://youtube.com/shorts/S-C7bmYGH1w?feature=share I think, and hope, it might be of help to anyone with the need to attach…
Inspired by https://www.printables.com/fr/model/300701-lowrider-3-cnc-laser-tree-10w-laser-mount-for-maki Taller support plate, added nut traps, and relocated the support so that the mounting screw is still accessible Link to the sliding…
Dust shoe - https://www.printables.com/model/1033926-makita-701-tool-mount-and-dust-shoe-for-the-lowrid LowRider 4 - https://www.printables.com/model/1034840-lowrider-4-cnc I recommend 3 walls when printing.
Hello! 2025/7/14 Update: Added latest .STEP and Fusion 360 .F3D files for anyone wanting to update/remix. For example, the mount hole hook could do with more material to make the part less likely to break. I've moved on to LowRider 4, but…
NOTE: There is now a version of this for the Kobalt trim router's wrench(es) and collet-nut set —plus some gratuitous plasma cutting thrown in too! Click here . Prints without supports. See pics or video for the tiny screw I used in the…
NOTE: In September, 2023, a fellow V1E maker ( @steved on the V1E forum ) needed a little bit of adjustability on the location of the right-side belt-tensioner+endstop mounts in his metal-strut-based LowRider, so I made this v1.1 remix of…
This is a hose adapter for the LowRider V4 CNC dust shoe. The dust shoe has a unique hose size of 69 mm. This model has an offset hole to ensure the hose does not collide, or get pinched with the rest of the core or router. The inner…
Just a small modification.
Only for LowRiders that are riding on metal strut (unistrut / superstrut). This mod moves the long axis belt (on the wheel side, not the rail side) down inside the metal strut, which both hides and protects it. In my case, this also makes…
This mod allows you to install the front Y belt on the side of your table (v2) This way you can access the whole worktop either from the front or the side, plus you get a nice and clean benchtop by just parking the LR3 to one side (no…
This should help to build accessories.
I didn't like dedicating my trim router only to the LowRider 2 but since there is not a way to buy an extra base, this was my solution. Print instructions Printed using PLA (time will tell if this was a good idea). .4mm nozzle, .3mm layer…
NOTE: There are now 3 editions of this (two with magnets, and a third without magnets): 1st edition - GET IT HERE - magnets on outsides, with opposing magnets touching 2nd edition - GET IT HERE - magnets on insides, with opposing magnets…
This holds the v1 power shutoff switch on top of the left YZ plate with the mount holes that are prebaked into the YZ plates.
New version available - Use v2 version, simpler setup and print, same functionality https://www.printables.com/fr/model/600688-lowrider-3-cnc-side-mounted-y-belt-v2 --------------------- This mod allows you to install the front Y belt on…
An unofficial hose adapter + spacer/brace thingy to zip-tie your 1.5" shop vac hose to the LR4. There will be an official LR4 1.5" hose → 2.5"dust shoe adapter from v1e, but I made this in the mean time to get started. This is…
This short video explains things fairly well: Peter H's amazing design of “fenders” for the LowRider v3 … now remixed by both Peter and myself to fit various tall YZ Plates, as well as stock plates and tall YZ plates combined with my…
The drag knife sold by the V1 Engineering shop has a ridge on it, that made use of my previous remix unusable for it. This is a mash up of Ryan's frontend and my remix's backend . :-) Also, I'm currently at work on designing a tool-less…
Tool mount for a 65mm VFD spindle
NOTE: There are now 3 editions of this (two with magnets, and a third without magnets): v1.4 - 1st edition - THIS LISTING - magnets on outsides, opposing magnets touching v1.5 - 2nd edition - GET IT HERE - magnets on insides, opposing…
I designed this Z-axis extender to increase the vertical travel of my Lowrider 4 CNC (V1 Engineering) from around 100 mm to 250 mm, using 300 mm linear guides. The goal was to gain more clearance for thicker materials or tall 3D…
Tool mount for a generic 55mm spindle, compatible with the dust shoe from the Makita mount. Printed in PLA-CF but should print fine in pretty much anything. (Excuse the very dusty pics, I'd been doing some routing sans dust collection.…
Here are a couple of simple badges you can use to decorate your V1 Engineering LowRider3 CNC machine, or your wife (or husband's) car or just print two layers and make them a bookmark! Both STL's are 200 mm wide, but the “Outlined 3”…
![[unofficial] LowRider v4 DIY CNC, gantry back covers, hinged for opening, and can pop out and back in, plus "tie downs" for them, and an in-gantry Jackpot mount](https://media.printables.com/media/prints/1082723/images/8511977_a5e0de90-94c3-4d5d-bc49-49ef96756aa0_c23e00ce-a752-452e-ad76-fbb7a7535ca4/img_8848.jpeg)
![[unofficial] LowRider v4 DIY CNC - for use with Unistrut / Superstrut / metal strut - table extenders, rail clips, and rail placement jig v1.0](https://media.printables.com/media/prints/1178649/images/8868018_3e4f06c2-c883-4012-9e58-fbac3acf33a3_d3c9d2f1-d15d-488f-bb0a-152d6677cd7c/img_0275-with-labels-retouched.jpeg)
![[Unofficial] LowRider 4 CNC: HIDDEN BELTS MOD - Hide/protect wheel side Y axis belt inside metal strut / unistrut / superstrut (v2.0)](https://media.printables.com/media/prints/97726131-54d3-4c7f-8d88-df078e9d92b1/images/11199823_68101f7e-ae67-4dbd-a53c-ee1f50b1932f_b9bd98fe-c9d5-47d8-ad87-130da7fffe7c/01.jpeg)
