1 / 3
(Unofficial) LowRider 4 CNC - 1.5" ShopVac Hose Adapter  + Spacer — image 1
1 / 3

(Unofficial) LowRider 4 CNC - 1.5" ShopVac Hose Adapter + Spacer

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Adapter for Shop-Vac 9198133 1.5 inch diameter hose to connect to the 2.5" dust port of the LR4 + Spacer for zip ties

Rating
0 / 5
Likes
11
Downloads
88
Makes
0
Views
491
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

An unofficial hose adapter + spacer/brace thingy to zip-tie your 1.5" shop vac hose to the LR4. There will be an official LR4 1.5" hose → 2.5"dust shoe adapter from v1e, but I made this in the mean time to get started.

This is specifically made for the Black and Red ShopVac 9198133 Premium Crush-Resistant Hose, 1.5 Inch Diameter, which I used for the older LowRider v3.

NOTE: The spacer is only tested for the Kobalt tool mount, but I would expect it probably works with the other similar ones. (The rectangular slot I made to store a 19x5mm disc magnet I use, attached to the alligator clip for my touch probe.)

In the pic I added some electrical tape on the port to get it a little tighter (I have since added another .2mm to the model.) The threaded hose part should screw in VERY tightly, though.

Tags