235 models
Based on the block template i designed some gridfinity battery holders i couldn't find online (at least not in this dense packing). Fusion files and STLs included for these batteries 40x LR44 8x/11x/14x CR123(A) 20x CR2032 12x CR1632 Note…
Battery boxes for small lithium batteries. Features print in place hinges and lock. Print instructions Print with PLA, 0.2mm layer recommended. Print both parts at once, hinges are printed in place. Like this model? Check out my other…
I created this to help distribute the litter drops to better take up the width of the LR4 waste container. In my particular situation, I have 2 cats, an LR4 and an LR2. The LR4 is used the most (80-90%). This print helps the LR4 last the…
This is a remix of Tabb's Button Cell Battery Box from Thingiverse. It's a box for CR2032 and LR44 batteries. I have added four places where 4x1,5mm magnets can be fitted. This is a remix of this object:…
This is a remix of the great battery holder by @dhiltonp . I've moved the slots and adjusted them to be 2 slots for CR20XX batteries and 2 slots for LR44/SR44/other 11.5mm diameter batteries. Gridfinity is a project by Zack Freedman ,…
Gridfinity is the ultimate organizer for your whole workshop! Zack originally posted all the Gridfinity accessories at https://bit.ly/3E2NxnZ LR44 Battery holder for the Gridfinity System. Holds 8 cells without them shorting. Add to any…
I was approached with a request to design a battery adapter that would let someone use 4 "LR44" batteries in place of the semi-available "4LR44" battery, because evidently the 4LR44 is hard to get in some places. I don't normally do…
This is based on my CR2032 coin cell holder design, but the following User Parameters changed: cell_diameter = 11.55mm cell_thickness = 5.5mm See the original model under “This remix is based on” for Fusion360 source file. If you don't…
First of all, thank you for downloading my model :D Amount of batteries in configs: 2x1 CR2032 x 16pcs LR44 x 12pcs 1x1 CR2032 x 8pcs LR44 x 6pcs Print settings: Speed: any (depends on printer) Infill: 10-100% Number of walls: 3-infinite…
Organize your whole workshop with with functionality in mind with Gridfinity! Zack Freedman originally posted all the Gridfinity accessories at https://bit.ly/3E2NxnZ This is a battery holder/storage that holds 10 LR44 battery cells. This…
This is a Remix of Print-in-Place, Customizable Cases for Button-type Batteries made by fuchsr that will fit 2x10 LR44 Coin-Cell Batteries. Please refer to the original model and its detailed documentation regarding Print Settings etc. :)
Diese Box dient der Aufbewahrung von bis zu 20 Stück Batterien LR44. Sie besteht aus einem Unterteil und einem Deckel. Der Deckel ist so gearbeitet, dass er gut auf dem Unterteil hält. Die Abstimmung von Haftung und Lösbarkeit habe ich…
Design description This is a gridfinity holder for 10 LR44 Coin cell batteries. Block area is 1x1, and has a height of ⅓, stackable. Gridfinity description Maker-favorite screwdriver storage blocks for the Gridfinity modular workshop…
This is a complete rework of Nat's Case for AG13 / SR44 / LR44 / A76. While still a print-in-place design, it now features a friction front latch to close the case. This makes it easier to open, reducing the likelihood of all the…
Case for 12 batteries of size AG13 / SR44 / LR44 / A76
Yashica Electro 35 Battery Adapter /Yashica MG-1 (etc etc) After a sucess of previous model (first upload on 5th december 2019), I decide to improve the model by reinforced the adpater. If you have an old camera that uses mercury cell…
One of common old film camera batteries is LR44. I made a bolt-and-nut type battery case which can store 6 batteries. This is handy and easily portable in any camera bag. 2021-11-30 There was some loose gap between the body and cap. So I…
This is a remixed version of the HSW Caliper and CR2032 Holder that is suitable for calipers that are using LR44 battery. Prints okay with PETG and 3 walls and 20% infill
Honeycomb wall coupling: “insert-empty” hex part. Further types of insert-empty can be found here (reduced friction) and here (rotated position).Print without need for supports, the hex insert is flat to the print bed. Printed at .20mm…
I don't know why but the original model is not stackable with the batteries in it. (The red arrow mark in the photos.) So I enlarged its height to 3U and it's stacking nice. Also added a label area because I like the label.
A 1x1 Gridfinity module that holds 12 LR44 batteries.
Hey there, Got a Rollei XF35 on a flea market and couldn't find any similar battery, so i redesigned the original cap to fit a LR44 battery instead. Light meter now works fine, but remember to compensate by adjusting the ISO/ASA of you…
Battery adapter to use LR41 in place of LR44. LR41 is also known as AG3 384 392 192 LR736 L736 GP192 and V36A button battery. LR44 is also known as AG13 357 L1154 A76 PX76A 303 D303 and D357 button battery. Battery in my VINCA DCLA-0805…
Thank Flywoo for the Arm protector model - you can download that for free from their website. Without these Skidpads / motor protectors / Standoffs (whatever we call them), the Explorer LR4 wobbles and lands on its Beeper. These make sure…
It's pretty much a Skystars clone of the original LR4 but with folding arms. Throw on some floppy props and have people guessing whether or not you have a long range 4" FPV drone in your pocket, or if you're just happy to see them!
As simple holder for two LR44/AG13 batteries using a standard paperclip cut down into two parts. Category: DIY
Sturdy case for CR2032/CR2025/LIR2032/LR44/SR44 coin batteries with screw attached lid
This very simple adapter allows you to use four common LR44 coin cell batteries to power your Minox 35GT, no more need for the long discontinued original battery!
Stackable Gridfinity bins, one 1x2x5 for storing 10 * LR14250 batteries, one 1x1x2 for storing 16 LR41 and one 1x1x2 for storing 10 LR44. The base box is generated with the Fusion 360 GridfinityGenerator,…
O4 camera and M100 GPS holder works with flywoo ND filters
This case holds a Flywoo Explorer LR4 O4 and O4 Pro. Picture example is PLA+ 4% infill, 2 walls, 2 top and bottom layers. Supports required for the lid retention rails - Grid 0.21 top and bottom distance. I added modifiers so the case is…
DJI O4 air unit pro antennas holder for Flywoo Explorer LR4 drone
remixed to fit my 5x2,6mm magnets
I designed this because I wanted it to be stackable and with a label tag that fit 9mm labels and the standard label tag are to large for a 3 unit heigh bin. printed with 0.2 layer height
Designed to adapt two 6x3mm magnets and an LR44 battery into the [XX]640 form factor. Make sure there is good contact between the magnet and battery, the adapter will not work if there is no continuity between the magnets and battery.…
LR44 battery cap for wide-spread cheap digital vernier caliper model, both for metal and plastic jaws style Prints with no supports and 0.2 layer height with “+” sign facing upwards. Tolerances provide medium hold strength, much like…
A slight modification of my previous holders
There is a 10x and a 15x holder included. Thanks to HobbyCNC for providing the F360 file and for making it so parametric!
This is exactly the same as the original stl, only change being the removed “CR2032 & LR44” text
This is a remix of the great battery holder by @dhiltonp . I've moved the slots and adjusted them to be 2 slots for CR16XX batteries and 2 slots for LR44/SR44/other 11.5mm diameter batteries. Gridfinity is a project by Zack Freedman ,…
Half height stackable beer crates that holds LR44 batteries. You can add https://www.printables.com/model/880654-beach-towel-clip to make it stackable. No special print instuctions. see my other beer crate mods too:…
i made this model for my practica vlc 2 slr camera, might not work for other devices. for the contact i used a piece of 0,75mm² phase wire. please let me know in the comments if it fits in your device.
Hi folks, I created this dispenser as I did not find any suitable LR44 dispenser that as well fits to the SKADIS board. After some iterations it works fine now. The fiddly part is to fill it up with batteries. I'm open on some ideas to…
This is a remix of the great battery holder by @dhiltonp . I've moved the slots and adjusted them to be 2 slots for CR16XX batteries and 2 slots for LR44/SR44/other 11.5mm diameter batteries. Gridfinity is a project by Zack Freedman ,…
Battery organizer To customise battery organizer you need to download the program from the OpenSCAD - The Programmers Solid 3D CAD Modeller website and run the tile_grid.scad file. You will see that you have 3 groups of parameters:…
Gridfinity box to store LR44 batteries. Gridfinity U-standards: 1 x 1 x 3 U (42 x 42 x 21 mm) Let me know if you need another size. I'll be happy to add it when I've got some spare time.
What/Why is this?: I decided to bring to the earth what it was sorely missing. A printable adapter to use an LR44 battery in a AA battery slot! It uses a single paper clip as contact for the battery terminals, and comes with two files:…
Print with PETG Infill 90% No Support Required
Adapter for using an external 1.5 V power supply with devices that normally use LR44 / AG13 / A76 batteries. Printed in PETG, 0.12 mm layer height, no supports. A 4 mm wide, 0.1 mm thick nickel strip is required (the same type used for…
The original wasnt stackable but the one i remixed is. I decided to emboss the LR44 on the model itself. I had no need for the holes on the bottom so i took those out but i uploaded a version with them as well. Its a bit tough to get the…
I wanted something for my CR batteries, to fit onto a 2x2 grid. For the Bin base, I used the Fusion360 Gridfinity extension: https://apps.autodesk.com/FUSION/en/Detail/HelpDoc?appId=7197558650811789&appLang=en&os=Win64. Supported CR Cell…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Have you ever wished you could store your coin cell batteries in a neat and…
A configurable battery holder which can either be created as a single piece or as multiple pieces that fit in each other as a puzzle. To configure use OpenScad , you just open the .scad file and use the customizer to generate your…
A gridfinity bin to hold 10 LR44 batteries
Update: Added a case for 4x LR44 batteries and Air Zn, and a waste case (with a recycle logo) Case for 2 LR44 cells, which uses PET soda bottle screw cap made by https://www.thingiverse.com/ondrejp_sk/designs My remix: I just made the…
Remix of this project , it holds up to 6 batteries
BOX BATTERIE LR44 Realizzato:www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 Nozzle: 0,8 Temperatura di Stampa: 205° Temperatura Piatto: 60° Riempimento: 25% Filamento: PLA XINGTONGZHILIAN
https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left corner of the BIBO bed. It is too wide for the other two positions. I have created a smaller version to fit the right-front corner…
Batteries seem to end up everywhere—loose in drawers, mixed with old holiday lights, half-used and hard to sort. When you finally need one, it’s never clear which still work. Hereby some simple organizer trays/bins for Gridfinity or…
I just added a nice big label for the front.
In addition to my multi purpose beer crate button cells insert ( https://www.printables.com/model/179090-stackable-beer-crate-for-cr2032-and-other-button-c ) I made an insert for LR44 type and similar. This insert is meant to be used with…
Minimal material usage (~6g). Recommended line width: 0.5 mm or 0.33 mm.
Coin cell battery holders made to fit in C and D battery dimensions. Designed to add cell batteries to unused C/D slots in a battery organizer. Currently supports: CR1632 CR2032 CR2450 LR44 These are the batteries I use so that's what I…
Mount for the Flywoo Explorer to hold the Foxeer M10Q-250 GPS.
I didn't like the original camera mount on the Flywoo Explorer, therefore I designed a new camera mount. Print in TPU. Will fit Caddx Nebula Pro and probably other 19x19mm cameras.
Thank Flywoo themselves for providing this model! You can get it off their website but theirs doesn't have a cutout like this one does. Without the cutout, good luck trying to get your UFL cables through :( Hopefully this helps someone…
Gridfinity bin designed to hold 28 AG13/LR44 batteries. Bin size is 2x2x4.
Holder for 2 pieces of LR41 batteries, which serve as a power source for the diode. Useful for lighting the interior of objects, such as in the picture attached. Print Settings Rafts: No Supports: No Resolution: 0,2 Infill: 20% Filament:…
A simple sleeve to adapt 4x LR44 button cells to the formfactor of the discontinued PX27 Mercury Battery. Those PX27-ish 5.6V batteries were mostly used by Minox 35 cameras. Most of them are tolerable to the 6V of the 4x LR44 Button…
I'm confident that 2x 6x6 mm magnets are strong enough to hold the cover so I remove additional 2 holes.
Batterie-Halter LR44 (11,6mm x 5,4mm) für Ikea Skadis Lochplatte. Das Modell habe ich auf Nachfrage von https://www.printables.com/de/@aSilentSnipe_1338659 angefertigt und hochgeladen. Ich habe das Modell noch nicht gedruckt und getestet.…
Case for CR2032 and LR44 batteries. Uses 3 x 2 mm disc magnets for the lid.
Multi battery organizer - 4xCR1616, 10xCR2025, 10xCR2032, 4xCR2450, 4xLR41, 12xLR44, 6xLR54, 6xAA, 5xAAA, 2xSD, 2xminiSD
Printed with PLA, nozzle 0.4mm, layer height 0.15mm. Included G-code is from Prusa Slicer for MK3S printer. Satin Powder-coated Sheet by Prusa3D.com used for print.
10x LR44 / AG13 Cell Battery Holder w/ Sliding Lid Quick and simple print (< 1.5hrs) with great functionality for storing up to ten of these cell batteries. Came across a handful of boxes/holders for these batteries, but wanted to create…
my Flywoo Explorer LR4 O3 came with a bent TPU antenna mount/holder - so I made a a replacement based on original dimensions. In the middle there is a sort of an antenna-plastic-housing stopper (I've seen on another design that it might…
Simply a LR44 button cell battery holder for the IKEA Skådis pegboard, it fits 7 batteries. No supports needed! I have attached the .f3d if you want to modify it.
Simple, quick to print and to the point, can insert batteries from the top, or pop them in from the front, can hold up to 4, or 5 if you're really brave. Prints as-is and just fits into an empty HSW insert.
This is a relatively simple storage box for CR2032 and LR44 batteries. It holds 15 CR2032s and 20 LR44s. Only two magnets arranged in a cross pattern are needed to hold the lid securely. There's no need to glue the magnets, as the holes…
A am using few Aqara Temperature Humidity Sensor sensors. But I was not satisfied with original CR2032 button as power source, therefore I made holder for 2x LR4(AA) combined with sun radiation shield. Aqara Temperature Humidity Sensor…
I needed a holder with several types I use at home. I couldn't find it, so I made my own. It holds 12 AA and 12 AAA batteries, as well as 4 CR2032 and 4 LR44/SR44 batteries. The slots for the smaller ones are recessed so it's easier to…
All model are printed in TPU. Print the VTX support, put 4 bolts in the exhagonal space, fix the VTX with M2 screws and fix the group to the frame. Fix the GPS mount to the back with 2 screws, and use only 1 of the original 2 vertical…
In order to make the G305 as light as possible you gotta use the lightest battery you can. Does require removal of stock battery tray which includes the dpi button, but dpi can be changed through the mouse software, plus that's just more…
Drop-in replacement for the standard flywoo LR4 antenna mount. Print without supports(turn the holes towards the table). Use TPU plastic. The antenna should slip into the mount.
LowRider v4 CNC - Buck Converter Tray for Ryan's (V1E) Jackpot CNC Control Box for the LowRider 4 CNC . A buck converter can be used to provide 12v to a 12v fan, even if your power supply is 24v. It can also be used to under-volt LED…
Battery Holder for LR44 / 303 / 357 / SR44 / AG13 button batteries. Holds 22 batteries I printed it with the text facing up, 3 walls, 15% infill, with no supports on my P1P
***Please note that button cell batteries are hazardous to small children. If you have children with access to your batteries it is best to keep them in their protective packaging*** Are you tired of your LR44 button cell batteries not…
2x2 Gridfinity battery holder for CR2032 and LR44 batteries. Includes a coloured label as a separate part for easy painting. The bin is 30mm high when measured from the drawer base. Printed on an MK4s with an MMU3 in Spool3D matte black…
Designed for a Discovery 4 running 18" steel wheels from a new model Defender. These engage into the hub itself rather than the bore of the wheel. They tap in place easily. Designed as an alternative for the OEM hubcaps which lock onto…
This is a drag chain mounting bracket for the LowRider 4 CNC. It is created with the 3d printed drag chain found here https://www.printables.com/model/70839-drag-chain-with-removable-closing-brackets in mind. Printing without supports and…
Remix LID of the Case (@John outdoorvideos) with added Flywoo Logo (https://www.printables.com/model/1316976-flywoo-explorer-lr4-o4-drone-case) + a Remix of the Case increased in height +25mm in Z and adapted LID for the increased…
AA size LR44 storage Material:PETG Category: Containers
This is a very compact box for storing up to 12 LR44 cell batteries. Lots of designs are available for battery storage, with things like ruggedized cases, hinged boxes with secure latches for transport, room for 100 batteries of 12…
Didn't have any 4x1.5mm magnets on hand (and didn't want to buy more magnets every time there's a design to print, so I modified it to fit the magnet sizes that I had (4.6mm cylindrical magnet).
Quick remix of Squish's Gridfinity LR44 battery holder with no lip and chamfered magnet holes for easier printing. Easy print. No supports.
This are Housing and Mount files for my version of the CYD Dial Pendant for the Lowrider V4 From V1 Engeneering https://www.printables.com/model/1034840-lowrider-4-cnc in compination with the Jackpot controller running FluidNC. I used…
anytime i need a couple batterys i always go an buy a 50 to 100 pack an when they come in the mail i put what i need in an then make a rugged style case to keep the rest in. ive made a couple for other batterys an have shared them so i…
