1 / 1
Rigid R2401 Trim Router Base for LowRider 2 CNC
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I didn't like dedicating my trim router only to the LowRider 2 but since there is not a way to buy an extra base, this…
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 91
- Makes
- 0
- Views
- 1,142
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I didn't like dedicating my trim router only to the LowRider 2 but since there is not a way to buy an extra base, this was my solution.
Print instructions
Printed using PLA (time will tell if this was a good idea).
.4mm nozzle, .3mm layer height, 20% infill, 4 perimeters.
Mounts to the LowRider2 base using 4x 8-32 machine screws (needs to be tapped for threading). Screw holes are on a 55mm centers, same as the stock base for the Rigid R2401 Trim Router.
Clamps with a 1/4-20 nut and bolt.