1 / 1
Rigid R2401 Trim Router Base for LowRider 2 CNC — zdjęcie 1

Rigid R2401 Trim Router Base for LowRider 2 CNC

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I didn't like dedicating my trim router only to the LowRider 2 but since there is not a way to buy an extra base, this…

Ocena
0 / 5
Polubienia
16
Pobrania
91
Wydruki
0
Wyświetlenia
1142
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I didn't like dedicating my trim router only to the LowRider 2 but since there is not a way to buy an extra base, this was my solution.

Print instructions

Printed using PLA (time will tell if this was a good idea).
.4mm nozzle, .3mm layer height, 20% infill, 4 perimeters.

Mounts to the LowRider2 base using 4x 8-32 machine screws (needs to be tapped for threading). Screw holes are on a 55mm centers, same as the stock base for the Rigid R2401 Trim Router.

Clamps with a 1/4-20 nut and bolt.

Tagi