Easy print Bladeless fan 100mm in-line blower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
V2 now available! My attempt at a bladeless fan. Very easy to print well.
- Ocena
- 0 / 5
- Polubienia
- 38
- Pobrania
- 67
- Wydruki
- 1
- Wyświetlenia
- 1657
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The “wing” is about as big as i could fit on my Ender 3 bed (235x235)
The V2 models have much larger airways, because the blower i am using, was not able to force the air well enough, through that tiny slit. But if you are using some sort of turbine style fan, you might have better luck.
You only need to support the lip on the inside with a standard grid support. The circular shape makes the support very rigid, until you peel it off in one whole piece.
feel free to dm if you need help making an adapter for a different size of fan.