15ml Paint Tube Altoids Tin Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a pair of inserts for Altoids tins (or similar) to hold 15ml tubes and double as mixing wells.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
About
This is a pair of inserts for Altoids tins (or similar) to hold 15ml tubes and double as mixing wells. The 15mmInsert_v4.stl is deeper than the bottom-only insert and supports 2 paint tubes up to 15ml inside of an Altoids tin without crushing or rattling. both inserts can double as mixing wells, and the bottom insert can be placed in the open lid of the tin for use, or attached to the top.
Both inserts are prepared to receive 5x2mm magnets attached with adhesive. Pictures show prints finished with plastic primer and white enamel spray paint to seal before use as mixing wells.
Please note: the bottom insert is designed to attach to the outside of the tin when closed, and the tin will not close with the insert on the inside of the lid.
Print Settings
- Nozzle: 0.4 mm
- Layer Height: 0.2 mm
- Infill: 15%
- Top/Bottom Layers: 5
- Supports: No