Dice Chest Mimic stronger hinge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mimic that holds you dice - a modified version of the model by ZacS
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 79
- Wydruki
- 1
- Wyświetlenia
- 397
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For my youngest's upcoming birthday, instead of party bags, we've decided to do 3D printed mimic dice chests (in woodfill PLA) with dice in them, given most of his friends are into D&D. I found the design by ZachS which looked great, but the teeth were too fragile and the "snap fit" hinge needed some help with the heatgun to put together. I've modified the design with simpler/chunkier teeth and to use m3 screws as hinges.
The model should be printed at 0.2 or smaller, and needs supports - the 3mf has support enforcers already painted, and I strongly recommend organic/tree supports for this. They come away pretty easily, especially in the woodfill PLA.
The hinge uses m3x10 bolts to secure it together, and I used a m3 tap on the hinge mounts on the lid part. Depending on your printer you may need to run a 2.5mm drill bit through the holes first, and possibly a 3mm drill bit through the holes on the chest part. 1/8" hardware may work but I haven't tested it.