Coil Pack Bracket for Nissan L20B
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A decent way to mount coil packs to your old Datsun/Nissan engine.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 163
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Work in progress of a coil pack bracket for my Datsun 620, which has an L20B engine. It's designed with a 10 degree cant to help with the “approach” angle to the plugs. It's touching the upper heater hose, I so would recommend adding a split piece of silicone hose to that hose, a loom, or something. The plug boot will need trimmed 20-25mm, but to then be able to use the plugs, you'll need to hollow out the boots. Allegedly, you can do that with a super sharpened tube in a drill. 3/8" ID should be correct.
Parts you'll need as designed to use:
- qty 4 - Hitachi IGC0214 coil packs
- qty 4 - M7-1.0 x 25 or 30mm screws
- qty 2 - 10mm longer M6 valve cover bolts (I used www.ebay.com/itm/393439634267?var=662265135752 to match OEM style)
I plan to upload a cutting jig and maybe a split version for smaller printers as well.
I did upload the step files for this one so if you want to get this CNC'd like I did, you can send these files to PCBway along with the tech drawing attached. My cost was almost $300 doing it this way, due to them charging me like $100 for the two tiny wedges AND being hit with a $100 inbound customs fee.
This should work for L16, L18, and L20B. Maybe more.