OnePlus 12 TPU case with glue on cam ring.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed from scratch, modeled around a 3D model from cults3d.com, which I purchased for that purpose
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 271
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- GNU General Public License v3.0
I needed a phone case for my OnePlus 12, so I modeled one around a CAD model from https://cults3d.com/en/3d-model/gadget/oneplus-12-3d-model, wwhich I purchased for that purpose.
I ran through a lot of iterations, until I was happy with the fit, using extrudr flex hard TPU, which imo is the best filament for that purpose, close to an original OnePlus phonecase.
I printed it @0.12mm layer height, first layer 0.16 to get crisper overhangs.
The cam ring is printed separately and glued on with some elastic glue. I used a 2 component PU glue, but some good contact adhesive will do the trick.