Over-edge headphone stand with magnetic docking tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
About A headphone stand with an optional magnetic organiser tray designed to fit x3 4x2mm round magnets.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Over-edge Headphone Stand with optional magnetic organiser tray
If you'd like to buy me a coffee to show your appreciation you can do so here:
buymeacoffee.com/Vanwilla
About
A headphone stand with an optional magnetic organiser tray designed to fit x3 4x2mm round magnets.
Fits desks with a thickness between 35mm - 20mm.
Included Files
I have included Bambu P1S print profiles for both the multi-colour version in the images as well as a single colour print file.
I've also included a STEP file of the tray as solid in case anyone wants to turn it into a coaster instead etc.
Printing & Assembly
I've worked the design to be fully printable with no supports and it prints well in both PLA and PETG on my machine. You will see a little bit of curling during the print on some of the more challenging overhangs but let it print and it should turn out fine. If you'd like to avoid any minor defects on overhangs then turn supports on and of course it will print even better albeit with a little waste!
The magnet holes are sized to be exactly 2mm in diameter with the intent to drill them out for a precise fit. However if you don't have access to a drill, they should still press in with a bit of effort/heat.
Feedback
As always I'd love to see how you get on printing it with different settings/colours and if you have any feedback please let me know!
Happy printing,
Vanwilla