1 / 1
Rumble motor mounts for Sim Racing Pedals by DIY Sim Studio — zdjęcie 1

Rumble motor mounts for Sim Racing Pedals by DIY Sim Studio

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

If you want to add rumble motors to use with metal pedals from DIY Sim Studio

Ocena
0 / 5
Polubienia
2
Pobrania
18
Wydruki
0
Wyświetlenia
378
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Noncommercial

If you want to add rumble motors to use with ShakeIt on Simhub and you've built your own metal pedals from DIY Sim Studio
then you've come to the right place.

Clutch, Brake and Accelerator Pedals are supported with a single design, if you want to two Motors on a single pedal then you will need to print out a mirrored print.

Reuse hardware on the pedals, only zip ties are needed to clamp the motors.

I've used this with PS3 and Xbox 360 rumble motors

 

Print as imported, you will want it stiff, I've used PLA+
3 perimeters (4 would be nicer)
30%

Tagi