Rumble motor mounts for Sim Racing Pedals by DIY Sim Studio
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you want to add rumble motors to use with metal pedals from DIY Sim Studio
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 18
- Makes
- 0
- Views
- 378
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
If you want to add rumble motors to use with ShakeIt on Simhub and you've built your own metal pedals from DIY Sim Studio
then you've come to the right place.
Clutch, Brake and Accelerator Pedals are supported with a single design, if you want to two Motors on a single pedal then you will need to print out a mirrored print.
Reuse hardware on the pedals, only zip ties are needed to clamp the motors.
I've used this with PS3 and Xbox 360 rumble motors
Print as imported, you will want it stiff, I've used PLA+
3 perimeters (4 would be nicer)
30%