Nocturne Camera Mount for Core One
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount for the Nocturne USB Camera from Luke's Laboratory.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 270
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a modification that builds on the fine work of existing designs to create a secure mount for the Nocturne USB Camera from Luke's Laboratory, for use with the Core One. You will also need the file for the front of the Case -- that's available here.
The Mount uses three 12 x 3 mm magnets; I wanted to be confident the Mount was secure, though this could probably be modified to suit whatever you have on hand.
The Case Back has been modified to accommodate four M2 nuts, to add the means to connect to the large round peg on the mount, and also to make the Case ever-so-slightly deeper to accommodate the peg (and keep it from pressing on the Camera circuit board).
The large peg on the Mount fits very snugly into the Case Back, though it does offer some option for rotation. I recommend inserting the nuts into the Case Back and securing it to the Mount before attaching the Camera and Case; the fit is tight, and this will give you the opportunity for adjustment.
I found it worked best to print the Mount with one of the small outer sides as the base, using supports.
Hardware you'll need:
Three 12 x 3 mm Magnets
Four M2 x 16 or M2 x 20 Socket-Head Screws
Four M2 Nuts