Liczymy pasujące modele…
Remixed the original for a better fit. Uses 2mm hardware, no need to go all the way through and use nuts. Printed mine out of GF Nylon. Will require supports now. Also remixed the GoPro mount. LED's and sensor are a tight fit. May need to…
Now can sit flush, still uses 2-4x m2 or m2.5 screws for the camera, and has shields around the LED openings.
Updates: 2026-03-31 Added step of PCB mockup (Luke's USB Cam.step) 2025-06-27 Added center hole to extrusion mount for potential pivot joint on a secondary mount, renamed it to Hinge Mount When I got my camera module, I noticed that the…
BOM Part Quantity Description m3x12mm BHSC 3 For hinge joints and swivel joint m3 square nut 1 For swivel joint m3 washer 1 For swivel joint Blue Lock tight 1 drop For swivel joint m2x12mm 2-4 For case m4x12mm 2 For 2040 mount m4 roll-in…
Alucard's alternate equip seen in various fights across season 2 of Netflix's Castlevania Nocturne show. BladeFull x 1 OR BladeHalfA x 1 and BladeHalfB x 1 HiltFull x 1 OR HiltHalf x 2 AlignmentPin x 4 if using the half models. You will…
Mount Camera using self tapping M2 screws, you could probably also use some regular M2 machine screws – but the 20mm long ones that come with Nocturne will need to be shortened to ~10mm. Mount this to frame using m3x8s. There are 6…
The boomerang/cross sub weapon wielded by Richter in the Netflix show Castlevania Nocturne Season 2. Center x 2 Blade x 8 AlignmentPinLong x 4 (if not using wooden dowels) AlignmentPinShort x 12 (if not using wooden dowels cut to size) I…
Ce buste représente une figure féminine élégante et intemporelle, au visage calme et expressif. Les traits sont doux, avec une chevelure courte et légèrement ondulée qui apporte du mouvement et de la finesse à l’ensemble. La tenue sobre,…
Should be a fairly easy print :)
Same mounting method and mounting hardware are used (1x M5 Nut, 1x M5 x 20mm Socket Head Screw). The base / mount to the printer frame has been extended from approximately 85mm wide to 140mm wide. This permits the camera to be mounted to…
The Nocturne USB magnetic camera mount took design influence from the @Prusa Prusa Buddy Cam as well as the ESP32 camera case design from @KeepTheBox, but was designed from scratch in FreeCAD. The camera mounts magnetically in the upper…
A mount for the Nocturne camera from Luke's Lab. It is tight, and you'll have to turn your camera on its side and maybe push down 1 of the IR emitters, but it provides a pretty good view of the entire build space and toolhead. Designed…
PRINT TIME: 7 h (Bambu P1S/X1C) FILAMENT: 225 g LARGEST PIECE: 141 mm x 91 mm Printing Instructions: Print one of each file as oriented, without supports. Make sure you have good adhesion for the small details on the lids. The lids are…
Intended for use in any printer with 3030 extrusions, but this was for use in a RatRig V-Core 4. Additionally, max temp for the camera is 70C so I need some cooling on it so the back plate will accept a fan. Use M2 heat-set inserts in the…
This is for the Nocturne camera you can find over on the Luke's Lab webstore. I wanted a camera that can operate without the chamber light on since it's so bright that I don't like to leave it on at night. Works great alongside a Rasperry…
This is a modification that builds on the fine work of existing designs to create a secure mount for the Nocturne USB Camera from Luke's Laboratory, for use with the Core One. You will also need the file for the front of the Case --…
Après avoir participé avec des amis au trail nocturne le lièvre et la tortue (19km) j'ai voulu leur faire plaisir en créant une médaille pour nous afin de garder un souvenir de cet évènement. PS: J'aime bien le café et/ou la bière :D…
2020 extrusion mount for Nocturne camera. Part is designed to mount to the underside of your top extrusions in the corner. Use M2/M2.5 screws to attach camera and front cover. Screws are threaded directly into plastic, no heatset inserts…
Printed in PETG with 0.4 nozzle and 0.2 layer height. Print in the orientation in the STL. The back panel can break too easily if it were to be printed with the flat side down. I did not need supports. STL, STEP, and FreeCAD files…
For the lid you can print the first layer in black and then three layers of white, and the rest in black to get the same effect that I have. There are inserts for the cards, with both a left aligned and right aligned option. Requires some…
NOCTURNE - Rising Coffin Organizer no support Halloween
Updates: 2026-03-31 Added step of PCB mockup (Luke's USB Cam.step) 2025-06-27 Added center hole to extrusion mount for potential pivot joint on a secondary mount, renamed it to Hinge Mount When I got my camera module, I noticed that the…
A mount for the Nocturne camera from Luke's Lab. It is tight, and you'll have to turn your camera on its side and maybe push down 1 of the IR emitters, but it provides a pretty good view of the entire build space and toolhead. Designed…
