1 / 4
Parkside x12 battery charger 12V-32V powered — zdjęcie 1
1 / 4

Parkside x12 battery charger 12V-32V powered

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Uses a buck boost converter to power the chargers dc side.

Ocena
0 / 5
Polubienia
3
Pobrania
16
Wydruki
0
Wyświetlenia
358
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I was inspired by this video: 

 

For the X12, the converter board did not fit in the enclosure. 

Set the converter to 12.9V out. Weather you want to use the low voltage cut out depends on your use case. I set mine to 10V. Set the out put amperage to 3A. 

Have a look at the video on how to find the low voltage DC side in a charger. 

Be care full when the charger is open and plugged in, the AC voltage used by the charger can kill you!

Use a soldering iron to to melt the tops of the buck boost converter board in order to lock it in. 

BOM

  • Buck boost converter “ LTC3780 DC-DC 5-32V to 1V-30V 10A Automatic Step Up Down Regulator Charging Module Power supply module”

  • 3M dual lock

  • Wire 

  • 4x M3 heatse inserts

  • 4x M3x10 screws

  • DC plug of you choosing

Tagi