"Coolinator" a 775 motor based Ø 280mm fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The "Coolinator" is a 775 motor based Ø 280mm ventilator
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 391
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The "Coolinator" is a 775 Motor based Ø 280mm Ventilator
Requirements:
6x M4 x 12mm screws (optional 2x hex-head-screws)
4x M4 washers
2x M4 nuts
Assembly:
The rotor is put together and the wings are fixed with 4x M4 x 12mm screws
The Motor is placed in the stand and fixed with 2x M4 x 12mm screws (including washers and nuts)
The top part is clipped into the middle and the side parts are put together and fixed with 4x clamps
Done!
WARNING: There is no safety mesh. Don't put things into the ventilator. Please use with a motor controller 12V, min. 10A with max. PWM 30% duty cycle. There is no warranty for any damages!
Update 2025-07-28:
A print profile for cable ties and a safety mesh were added:
