"Coolinator" a 775 motor based Ø 280mm fan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The "Coolinator" is a 775 motor based Ø 280mm ventilator
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 59
- Makes
- 0
- Views
- 390
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The "Coolinator" is a 775 Motor based Ø 280mm Ventilator
Requirements:
6x M4 x 12mm screws (optional 2x hex-head-screws)
4x M4 washers
2x M4 nuts
Assembly:
The rotor is put together and the wings are fixed with 4x M4 x 12mm screws
The Motor is placed in the stand and fixed with 2x M4 x 12mm screws (including washers and nuts)
The top part is clipped into the middle and the side parts are put together and fixed with 4x clamps
Done!
WARNING: There is no safety mesh. Don't put things into the ventilator. Please use with a motor controller 12V, min. 10A with max. PWM 30% duty cycle. There is no warranty for any damages!
Update 2025-07-28:
A print profile for cable ties and a safety mesh were added:
