1 / 3
Toilet Paper Holder with Compartments for Feminine Products — zdjęcie 1
1 / 3

Toilet Paper Holder with Compartments for Feminine Products

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A toilet paper holder with the added convenience of ease of access storage space for tampons and panty liners.

Ocena
0 / 5
Polubienia
10
Pobrania
24
Wydruki
0
Wyświetlenia
240
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Public Domain

I made this toilet roll holder for my wife. It holds 3.92"x4" (or 9.9cm x 10.1cm) toilet paper rolls snugly. 

 

  • I've created two versions of this model: one with a flat back and no screw holes, suitable for use with adhesive (I used liquid nails on drywall) or tape, and one with four mounting screw holes that accept a #8 wood screw. This screw can be installed into a stud or drywall with the proper anchor.

 

  • It also has a compartment for feminine hygiene products such as tampons and panty liners. There is a small slot on the side to stock the panty liners if you have issues inserting them from the front end.

You can use these compartments for other things, of course.

It accepts this style of spring rod roller (designed off of the dimensions of this roller from amazon)

But it should also work with spring rollers like this one which has a flat end - (14mm-20mm Diameter) or (½" - ¾" Diameter)

_______________________________________________________________________________________________________

PRINT SETTINGS

_______________________________________________________________________________________________________

I printed mine with PETG-HF on my Bambu Lab X1C at Extra Draft layer height (0.28mm) using a 0.4mm nozzle. 

I tend to make my prints a bit stronger than they need to be.

Infill25%
Infill TypeAdaptive Cubic
Perimeters / Wall Loops4
SupportsYes - Tree Supports (on plate only)
OrientationUpright (as shown)

Feel free to post your makes or suggestions if you'd like to propose an improvement! I also uploaded the .f3d file if you want to make your own modifications!

Tagi