Liczymy pasujące modele…
Intro This supportless wallmountable dispenser is easily printable and designed to fit the smaller tampons used in the EU. It should fit o.b. ProComfort and everything up to roughly 15x55cm (min. fitting six tampons). It can be used…
We took a battery dispenser and cambered it for small to large tampons. A lid keeps the tampons in place for storage or transport. Optional M3 screws can secure the lid in open or shut position. Has holes for Wall mounting. New versions…
držák na tampony a uchošťoury do koupelny, dejte radši pomalejší tisk v horní partii se mi převis moc nespojil
A simple, discreet, and easy-to-print emergency tampon container. It holds tampons up to 18mm in diameter and 50mm long. It won't take up any more space than a typical lipstick case. It's a great way to secure your emergency equipment ;-)
Organizér je připojitelný přímo na HSW, připojovací díl je větší, sedí přímo do plástve, není třeba tisknout žádné další díly. Snadný tisk bez podpěr. Organizer for HSW, connect directly to honeycomb. Easy print, no support.
Voici un jeton d'auto tamponeuse fonctionnelle !! JE NE SUIS PAS RESPOSSABLE DE COMMENT VOUS ALLEZ LUTILISEZ (utiliser le uniquement avec accord du proprietaire ! )!!
The model takes in tampons (AA Batteries also work) and dispenses them. Pulling out one and the ones above will go down. A small ramp inside makes sure that the bottom item is pushed slightly forward so that taking it out is easy. The…
VAG - Tampon PEZ dispenser by plasmatree on Thingiverse: https://www.thingiverse.com/thing:3162829
Ein Tamponetui für 4 Tampons, bei dem Sie eine Farbe für die Box und eine andere Farbe für den Einsatz wählen können.
I printed the Thingiverse VAG - Tampon PEZ dispenser in two different colors for my wife and a friend of her. Both found it very funny. I noticed that thicker tampons tend to work better. However, the design doesn't work with smaller…
This is a dispenser for tampons. Made for diameters up to ca. 20mm and a length of 55mm, e.g. “o.b. comfort super plus”. Holds around 15 - 20 pieces. Ideally the pieces roll down the slope. Sometimes they can get stuck. A little shaking…
Ce tampon/sceau en forme de cœur est parfait pour personnaliser vos créations : faire-part, lettres, carnets, étiquettes ou emballages cadeaux. Il peut être utilisé avec de l’encre, de la pâte à cacheter ou de l’argile souple. Le motif en…
Use Case: This is my creation of a stamp using customizable shape printing. I'm uploading the Fusion 360 file, which will allow you to modify the stamp size and add any text or shape you like. Printing: PLA Please give this design a like…
Use Case: This is my second creation of a stamp using customizable shapes. I'm uploading the Fusion 360 file, which allows you to modify the size of the stamp and add any text or shape you like. The stamp prints as a single block, and the…
Use Case: This is my third stamp creation. This time, I'm reusing the imprint shapes to create either a seal or a stamp. I've already created a few shapes and I'm making them available. Printing: PLA Please like this design if you like…
This is my take on a stamp for the library where I work. I started with a commercial wooden handle and changed the proportions for a more ergonomical feeling. No supports needed. Really strong and solid. I then used laserable rubber to…
Tampon en relief inversé “Happy Birthday” – Idéal pour décorations sur un gâteau.
Tampon en relief “Happy” – Idéal pour décorations sur biscuits, pâte à sucre ou gâteau.
Tampon en relief “Happy” – Idéal pour décorations sur biscuits, pâte à sucre ou gâteau.
Praktischer Spender für bis zu 22 Tampons. Die Tampons liegen im Spender in einer Reihe übereinander. Das hat den Vorteil gegenüber anderen Spendern, dass die Tampons nicht stecken bleiben wenn sie nachrutschen. Dadurch hat man auch die…
Modèle de remplacement de slider de protection pour cale pied de moto superbike imprimé en TPU our une meilleur résistance et flexibilité tampons également imprimé en TPU
Tampon's box that can fit 20mm x 55mm tampons Sizes: S - 4 tampons (28mm x 88mm) M - 8 tampons (48mm x 88mm) L - 16 tampons (88mm x 88mm) --- Do you like my model? Buy me a coffee! 50% of all earnings will be donated to charity…
This is a tampon box with a magnetic lid. Magnets: 15mmx5mm cylinder. on the lid i used small screws as a pin in the hinge use filament 1,75mm
My wife asked for on, so I made one. The left side fits 13mm x 51mm (normal), the right side 15mm x 51mm (super). 1mm bigger in any direction might work as well. For the text I used an open source font that I found online, but I don’t…
Intro This supportless wallmountable dispenser is easily printable and designed to fit the smaller tampons used in the EU. It should fit o.b. ProComfort and everything up to roughly 15x55cm (min. fitting six tampons). It can be used…
Ce tampon encreur vous permet de tamponner des images en 2 couleurs. L'utilisation et la fabrication de ce tampon sont présentées dans la vidéo. This ink pad allows you to stamp images in two colors. The use and creation of this stamp are…
Boite pour stocker son tampon et la plaque encreur. Dimension tampon (L*H*E) : 52*78*25mm Dimension encreur (L*l*E) : 67*51*9
Trying to better organize the first-aid kit that I carry on my backpack, I was annoyed at the tampons not having a place. Figured the bouncing around can't be great for their sealing either, even though I saw that mode of transportation…
Filament : Prusament PETG Buse : 0,4mm / Couche : 0,2mm / Remplissage : 15% Gyroïde / Support : non / Bordure : non / Périmètres : 2 / Durée : 03h48m
Magnete wären 6mm x 2mm aber die box funktioniert auch ohne nur mit ist sie deutlich angenehmer zu benutzen.
We took a battery dispenser and cambered it for small to large tampons. A lid keeps the tampons in place for storage or transport. Optional M3 screws can secure the lid in open or shut position. Has holes for Wall mounting. New versions…
Makeup remover pad holder / Držák na odličovací tampony Dimensions: 100x60mm PLA, 0.20 Quality => 4h22m
držák na tampony a uchošťoury do koupelny, dejte radši pomalejší tisk v horní partii se mi převis moc nespojil
First version is just simple holder. Second version is made with place for decorative plate. Hole in back is made for this style of sucker. Or you can use flathead screw.
A simple, discreet, and easy-to-print emergency tampon container. It holds tampons up to 18mm in diameter and 50mm long. It won't take up any more space than a typical lipstick case. It's a great way to secure your emergency equipment ;-)
Organizér je připojitelný přímo na HSW, připojovací díl je větší, sedí přímo do plástve, není třeba tisknout žádné další díly. Snadný tisk bez podpěr. Organizer for HSW, connect directly to honeycomb. Easy print, no support.
Made a simple remix of this Tampon dispenser by Kabauter. I rounded off the front, where you take out the tampons, for a cleaner look and better user experience. The back of it has a slope, that would need support, I didn’t want to bother…
Layer height: 0,2mm Supports: YES Material: PLA or PETG
This container allows to have two tampons discretely on reserve on your desk or in your briefcase.
Not self inking :-) No infill, no supports, easy to print and easy to assemble. This stamp design is simple and ergonomic. The hollow handle is shaped to orient the stamp and to get a better grip. The label sits on top of the handle…
J'ai créer ces tampons en TPU pour remplacer ceux usées de mon escabeau qui est en tube de 25mm.
J'ai créé des tampon en TPU pour mon échelle en aluminium. Tampon pour profil alu de 76mm x 26mm/22mm.
Simple tampon wall holder fo tampons with 52mm length. Wall mount.
Light half mask (Covid19) Filter make-up removal tampon 60mm Body TPE flexible Category: DIY
Half mask (Covid19) Filter: 2x make-up removal tampon 60mm Face - PETG Other - TPE flexible FaceCoveringChallenge Category: DIY
The story: Wanted to print small case for condoms which could be thrown in a bag and forgotten about without worry that the condoms will get damaged, because you know you should not keep condoms in a wallet. I could not find a single…
Výška (height): 120mm Průměr (diameter): 80mm Vnitřní průměr (inner diameter): 62mm
This is just a lid for kabauter's excellent Tampon Dispenser. Find his great model here: https://www.printables.com/model/126731-dispenser-for-tampons
Conical inside to make it front heavy and a 33.5 degree twist to support it in flight. Outer-Ø 17.2mm might need a little adjustment depending on your printer settings. Weight can be adjusted by changing the infill. 25% infill with 4…
This is a remix of kabauter 's excellent model. It's taller and can hold the contents of an entire large pack of tampons (64 or 54 pcs). I also added a lid, that is different from my other lid. This one looks a little more elegant, I…
Tactical tampon magazine Rounds: 8 Cal.: Normal (can be adjusted by scaling)
English/Anglais I created this stamp pattern inspired by the work of Morley Kert (on Youtube). Printing advices : It is advisable to print it with a good fill rate (50% to 100%) and to activate the ironing to have a better rendering. You…
La brasserie "La Bicorne" avait besoin d'un tampon pour marquer ses sacs crafts. PS: J'aime bien le café et/ou la bière :D The "La Bicorne" brewery needed a stamp to mark its craft bags. PS: I like coffee and/or beer :D Print Settings…
This 3D printed tampons and pads holder is a convenient and stylish way to store your feminine hygiene products. It is made of durable PLA plastic and is low maintenance. The holder has four compartments, two for pads and two for tampons.…
Le modèle STL n'a pas de figure sur le tampon afin que vous puissiez facilement le modifier si vous n'utilisez pas Freecad. Modèle prévu à l'origine pour imposer une signature sur des poteries et céramiques. Note d'impression Pas besoin…
a remix of "Dispenser for tampons" by kabauter mounted on a 2x3 gridfinity baseplate without magnet holes! also check out my other gridfinity-cosmetic designs
We all love the original Cotton pad and tips holder (aka Tamponator) from @Delipistacna_543029 , so after printing it I kinda got a bit worried my Q tips were there just accumulating dust. Had this idea to extend the top with the same…
My wife always had packets of tampons laying around and it started to bother me, and her. So we fixed it with this simple model. Hope you enjoy!
Designed to fit the o.b extra protect, but also will fit the “small/normal” ones Can be mounted on the wall with double-sided tape should fit up to 10 tampons
Simple printing without supports. Use an M3x20mm screw to connect the hinge. Tampon size normal.
Reduced the wall width in order to print faster. Combined with my fast print model from the battery holder.
Two organizer boxes to organize some of our master bathroom's bottom drawer items. The tall version has four compartments - one for tampons, one for regular liners, one for specialty thong liners, and one for an item called a drip stick.…
EN: (Use double-sided adhesive tape to stick it on the wall.) MK1 - Closed makeup remover pads holder for my wife. MK2 - Open version. bonus - Low version for me ;-) …portable box when I use these pads for cleaning. LID - lid preventing…
A simple design that prints and works very well. No hardware needed and little to no supports needed. I did print it with a single support in the hole in the lid for the screw but could prolly easily be printed without supports if you…
The four different provided sizes should hold 3-4 tampons and usually at least two sanitary towels / pads, i.e. anything any woman might require throughout one day during menses. This case offers a handy, compact and rather stylish way to…
