Supportless Wallmounted Tampon Dispenser (EU)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This supportless wallmountable dispenser is easily printable and designed to fit tampons up to 15x55cm.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 148
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Intro
This supportless wallmountable dispenser is easily printable and designed to fit the smaller tampons used in the EU. It should fit o.b. ProComfort and everything up to roughly 15x55cm (min. fitting six tampons). It can be used standing or mounted to the wall e.g. next to the toilet paper for fast and easy accessibilty.
There are two versions available. The regular one with a 5mm ramp and the v2 with a 10mm ramp. The latter is to mitigate tampons getting stuck sometimes (which can always be fixed with a little tap).
Printing
Material: PETG
PLA should also work but I rely on PETG in wet environments like the bathroom
I used Prusament Jet Black PETG
Layer Height: 0.3mm
Infill: 15%, Gyroid