1 / 5
Tampon Dispenser
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The model takes in tampons (AA Batteries also work) and dispenses them. Pulling out one and the ones above will go down. A small ramp inside makes sure that the bottom item is pushed slightly forward so that taking it out is easy.
The dimensions of the compartments are 52,5mm x 15mm.
If you need variation of this, please go ahead and write a comment or message me!
Print instructions:
I printed this in PLA 50°C print bed temp(reduce warping) and 210°C 0.4 nozzle. Adjusting the infill only changes the infill of the base since the walls are 3 lines thick, so 15% is sufficient.