1 / 5
Tampon Dispenser
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Quick access to tampons were ever you need it.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 90
- Makes
- 0
- Views
- 735
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The model takes in tampons (AA Batteries also work) and dispenses them. Pulling out one and the ones above will go down. A small ramp inside makes sure that the bottom item is pushed slightly forward so that taking it out is easy.
The dimensions of the compartments are 52,5mm x 15mm.
If you need variation of this, please go ahead and write a comment or message me!
Print instructions:
I printed this in PLA 50°C print bed temp(reduce warping) and 210°C 0.4 nozzle. Adjusting the infill only changes the infill of the base since the walls are 3 lines thick, so 15% is sufficient.