1 / 2
MMU3 Auto Rewinder Holder for IKEA Skadis
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed MMU3 Auto Rewinder AXE and Holder for IKEA Skadis
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 65
- Wydruki
- 4
- Wyświetlenia
- 639
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 4) (Komentarze: 5)Remiksy (0)Kolekcje (45)Powiązane
The Auto Rewinder is probably the best solution for the MMU3!
My holder work with the IntegratedRewinder_v5.6_75 from Jim Nangano (https://www.printables.com/model/269390-integrated-auto-rewinder-for-spool-tank/files).
Insert the modified AXE before closing the Auto Rewinder then its ready to use.
Non Printed Parts:
2x 608 bearings
The internal auto rewinder springs must be printed in PETG minimum because the PLA cracking after a few use...
The other parts can be printed in PLA 15% infill, its strong enough to hold 1kg spool.