1 / 6
Prusa Mini Riser Feet — zdjęcie 1
1 / 6

Prusa Mini Riser Feet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Raise the Prusa Mini Base mod by Prusa Guy to accommodate the universal spool holder.

Ocena
0 / 5
Polubienia
4
Pobrania
9
Wydruki
0
Wyświetlenia
166
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This is a remix of “Prusa mini base anti vibration feet” by blmak  In order to use the Universal Horizontal Spool Holder by mc2_project3d with the Prusa Mini Base, the Base has to be raised to accommodate the holder.   blmak's  feet follow the contour of the Mini Base legs.  Since I didn't need the inti-vibration part, I "solidified" the feet, put a pin on top to align with the bottom of the Base leg and made a recess on the bottom of the riser foot so the original mini anti-vibration foam can still be used. Since I consider these to now be a permanent part of the Mini's base, I just glued them in at the pin connection.

Cheers

[NjB]

 

Tagi