QFH Antenna for Ham Radio Satellites
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Build a 146 MHz QFH antenna for the amateur radio satellites that use 146 MHz for either the uplink or the downlink.
- Ocena
- 0 / 5
- Polubienia
- 61
- Pobrania
- 445
- Wydruki
- 0
- Wyświetlenia
- 2455
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
A QFH antenna has an omnidirectional pattern with enough gain to operate either on the uplink or the downlink for communicating through the various amateur radio satellites that use the 2m and 70cm bands. These 3D printed parts can be used to build such an antenna using only a length of 1 inch diameter PVC tube, about 16 feet of 12 gauge copper wire, and two readily available 3/8 inch diameter fiberglass electric fence posts.
PETG at 0.2 mm layer height and no supports.
A construction video showing how to build it can be found on YouTube at