1 / 1
QFH Antenna for Ham Radio Satellites — image 1

QFH Antenna for Ham Radio Satellites

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Build a 146 MHz QFH antenna for the amateur radio satellites that use 146 MHz for either the uplink or the downlink.

Rating
0 / 5
Likes
61
Downloads
453
Makes
0
Views
2,503
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

A QFH antenna has an omnidirectional pattern with enough gain to operate either on the uplink or the downlink for communicating through the various amateur radio satellites that use the 2m and 70cm bands.  These 3D printed parts can be used to build such an antenna using only a length of 1 inch diameter PVC tube, about 16 feet of 12 gauge copper wire, and two readily available 3/8 inch diameter fiberglass electric fence posts.

PETG at 0.2 mm layer height and no supports.

A construction video showing how to build it can be found on YouTube at