Zooz ZSE41 800LR Contact Sensor Mount with Mechanical Arm for Magnet on Stiltz Lift / Elevator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Contact sensor mount allows a magnet to move on an arm and be operated by pulling a string.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 100
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This mount for the Zooz ZSE41 contact sensor snaps onto a 20mm x 20mm metal bar. The metal bar may move up and down, thus, the magnet and contact sensor cannot be fixed on the structures. The bar will move down by 4" on occasion which will pull the arm up and open the contact sensor. When the metal bar returns to the original position, the arm will fall and close the contact sensor. The arm is attached to the mount by using a piece of 1.75mm filament. The hook stuck to the top holds the string in place. The magnet provided with the Zooz ZSE41 fits tightly (after being removed from the plastic encasing it) in the arm slot. Only the mount requires an organic support and is part of the .3mf file. Dental floss was used for the string.
The FreeCAD 1.1 file is available and mostly parametric to fit other contact sensors and magnets. This picture shows a use within a Stiltz lift.