1 / 1
Qin F21 Pro Protective Case - Custom 3D Printed Cover — zdjęcie 1

Qin F21 Pro Protective Case - Custom 3D Printed Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The image is for illustration only

Ocena
0 / 5
Polubienia
2
Pobrania
27
Wydruki
0
Wyświetlenia
109
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Open Community License v1.1

About This Model

This is a custom-fit protective case designed specifically for the Qin F21 Pro. It provides a snug fit, essential impact protection, and clear cutouts for all necessary ports, buttons, and the camera. Whether you're looking to refresh your phone's look or add a layer of protection, this model is simple to print and ready to use.

Features

  • Precise Cutouts: Aligned for the rear camera, charging port, and side buttons.

  • Snug Fit: Engineered to snap on securely without damaging the phone body.

  • Print-Friendly: Designed to print smoothly with minimal or no supports required depending on orientation.

Recommended Print Settings

  • Material: TPU (Flex) for the best shock absorption and easy snap-on fit, or PLA / PETG for a rigid shell.

  • Infill: 20% – 100% (depending on desired rigidity).

  • Layer Height: 0.2 mm or 0.16 mm (for smoother side walls).

  • Perimeters/Walls: 3 or 4 for extra strength around the edges.

  • Supports: Only where necessary around cutouts (if printing flat, usually optional).

Tagi