Qin F21 Pro Protective Case - Custom 3D Printed Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The image is for illustration only
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 27
- Makes
- 0
- Views
- 109
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Open Community License v1.1
About This Model
This is a custom-fit protective case designed specifically for the Qin F21 Pro. It provides a snug fit, essential impact protection, and clear cutouts for all necessary ports, buttons, and the camera. Whether you're looking to refresh your phone's look or add a layer of protection, this model is simple to print and ready to use.
Features
Precise Cutouts: Aligned for the rear camera, charging port, and side buttons.
Snug Fit: Engineered to snap on securely without damaging the phone body.
Print-Friendly: Designed to print smoothly with minimal or no supports required depending on orientation.
Recommended Print Settings
Material: TPU (Flex) for the best shock absorption and easy snap-on fit, or PLA / PETG for a rigid shell.
Infill: 20% – 100% (depending on desired rigidity).
Layer Height: 0.2 mm or 0.16 mm (for smoother side walls).
Perimeters/Walls: 3 or 4 for extra strength around the edges.
Supports: Only where necessary around cutouts (if printing flat, usually optional).