VIJIM VL100C Bouncer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The LEDs are too distinct so I designed a light bouncer.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 1
- Wyświetlenia
- 164
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I’m using the LED light for negative scanning, but the individual LEDs were too distinct and appeared in the images. To solve this, I designed a diffuser that blends the separate LEDs into a single, more uniform light surface.
A frosted plexi sheet 2.75mm thick is used (3mm are often a bit thinner). Dimensions 80x63mm (can be made larger than 63mm for easier removal). A clear plexi can also be used if sanded on both sides with fine grit >800.
The slotted tripod screws are locked in place by a piece of filament.
If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.
https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6
