VIJIM VL100C Bouncer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The LEDs are too distinct so I designed a light bouncer.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 1
- Views
- 164
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I’m using the LED light for negative scanning, but the individual LEDs were too distinct and appeared in the images. To solve this, I designed a diffuser that blends the separate LEDs into a single, more uniform light surface.
A frosted plexi sheet 2.75mm thick is used (3mm are often a bit thinner). Dimensions 80x63mm (can be made larger than 63mm for easier removal). A clear plexi can also be used if sanded on both sides with fine grit >800.
The slotted tripod screws are locked in place by a piece of filament.
If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.
https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6
