PC Case DB9 serial port and dual USB3 3.5" front panel adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A front panel adapter for a 3.5" drive bay to break out a 9 pin RS232 serial port and USB3 from PC motherboard.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 309
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to break out a 9 pin RS232 serial port from the header my PC's motherboard to the front panel, and at the same time retain two USB 3 ports.
This adapter fits in a standard 3.5" floppy drive bay. The USB3 cable is a StarTech.com USB3SPLATE removed from the PCI slot bracket. It's available from Amazon and probably other computer suppliers. I used an IDC ribbon cable and DB9 socket from my bits box.
I printed in ABS for heat stability, with the front face down on the printbed for a nice front finish. Designed in FreeCAD 1.0 - design files included.
The PC case is an old Cooler Master one which only has USB2 on the front panel.