1 / 6
2-in-1 Travel Case Stand for Philips OneBlade Trimmer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Travel case designed for the Philips OneBlade Trimmer that doubles as a stand
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 351
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
This model is printed in two parts. Part 1 is the base and has four sockets for M3nS nuts. Part 2 is attached with four M3x10 screws; these parts can all be found in the spare parts bag of the Prusa MK3S+ kit. The M3x10 screws that I used had a flat head, but Prusa's do not. If you're using Prusa's you'll want to download the P2Modified file.
The supports in the sockets were a little challenging to remove but I was able to get them out with a pair of small tweezers.
Printed with 5% infill and 0.3mm layer height