1 / 6
2-in-1 Travel Case Stand for Philips OneBlade Trimmer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Travel case designed for the Philips OneBlade Trimmer that doubles as a stand
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 25
- Makes
- 0
- Views
- 351
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution
This model is printed in two parts. Part 1 is the base and has four sockets for M3nS nuts. Part 2 is attached with four M3x10 screws; these parts can all be found in the spare parts bag of the Prusa MK3S+ kit. The M3x10 screws that I used had a flat head, but Prusa's do not. If you're using Prusa's you'll want to download the P2Modified file.
The supports in the sockets were a little challenging to remove but I was able to get them out with a pair of small tweezers.
Printed with 5% infill and 0.3mm layer height