1 / 2
Honda K20 K24 Fuel Rail Hose Mount Clip — zdjęcie 1
1 / 2

Honda K20 K24 Fuel Rail Hose Mount Clip

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a clip that fits onto the stock fuel rail of most K20 and K24 engines. From the factory there was a wiring…

Ocena
0 / 5
Polubienia
3
Pobrania
19
Wydruki
0
Wyświetlenia
223
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

This is a clip that fits onto the stock fuel rail of most K20 and K24 engines. From the factory there was a wiring harness that mounts to this hole. But if you have done a motor swap or a tucked harness then there are mounting holes in the fuel rail which are left empty. These clips pop into those holes and then you can attach 3/8 silicone hose.

Honestly I think for most Honda guys this won't be very useful. Because if you are doing a tucked harness you probably won't use the stock fuel rail anyway.

However if you have a K swapped miata or 240sx or BMW these clips work great to route your IACV and PCV hoses.

I used bigrep hi-temp filament with 100 percent infill.

Category: Automotive

Tagi