Honda K20 K24 Fuel Rail Hose Mount Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a clip that fits onto the stock fuel rail of most K20 and K24 engines. From the factory there was a wiring…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 19
- Makes
- 0
- Views
- 223
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
This is a clip that fits onto the stock fuel rail of most K20 and K24 engines. From the factory there was a wiring harness that mounts to this hole. But if you have done a motor swap or a tucked harness then there are mounting holes in the fuel rail which are left empty. These clips pop into those holes and then you can attach 3/8 silicone hose.
Honestly I think for most Honda guys this won't be very useful. Because if you are doing a tucked harness you probably won't use the stock fuel rail anyway.
However if you have a K swapped miata or 240sx or BMW these clips work great to route your IACV and PCV hoses.
I used bigrep hi-temp filament with 100 percent infill.
Category: Automotive
