O2 Android Tag Bulge Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Low-profile screw-on case securely holds locator tags and protects them from accidental knocks or removal.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 114
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Originally designed to attach a tag (⌀ 33 mm) under the seat of my rowboat, the case is suitable for attaching tags to other flat surfaces such as bench seats, box lids, etc. It has a low, flowing profile to prevent knock-off.
There are two basic models:
- a simple circular one
- a narrow one for attaching to narrow surfaces such as planks
The holes take size 3 metric screws, ideally with a conical, recessed head. I print in PETG, which gives the whole thing a very sturdy feel.
The attached 3mf files (and of course also the gcode files) have supports, and I have allowed 0.5 mm of clearance above the height of the tag, so that you don't need to obsess too much about removing the supports interface from the print – with PETG it can be a hassle. There is also a zone with lowered layer height around the top.