O2 Android Tag Bulge Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Low-profile screw-on case securely holds locator tags and protects them from accidental knocks or removal.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 114
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
Originally designed to attach a tag (⌀ 33 mm) under the seat of my rowboat, the case is suitable for attaching tags to other flat surfaces such as bench seats, box lids, etc. It has a low, flowing profile to prevent knock-off.
There are two basic models:
- a simple circular one
- a narrow one for attaching to narrow surfaces such as planks
The holes take size 3 metric screws, ideally with a conical, recessed head. I print in PETG, which gives the whole thing a very sturdy feel.
The attached 3mf files (and of course also the gcode files) have supports, and I have allowed 0.5 mm of clearance above the height of the tag, so that you don't need to obsess too much about removing the supports interface from the print – with PETG it can be a hassle. There is also a zone with lowered layer height around the top.