Scrubber buckets with More clearance and Added design
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is 3mm thinner to provide more clearance between the bed and the buckets.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 186
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a pretty simple remix inspired by @chylld. like them, I’ve added a different graphic to the front to add a little bit more flare. I’ve also reduced the width of the buckets by 3 mm to provide additional clearance between the print bed and the buckets as when I first attempted this, they caught on the undercarriage of the heating bed and bound up the Z axis. I’m fairly confident the bucket was not sitting correctly however for peace of mind, I still made the additional clearance.
I personally printed in PETG for heat resistance, though I’m imagining PLA would work just fine. Basically stock settings with additional walls for some strength as well as breakaway supports.
@chylld remix: https://www.printables.com/model/912291-prusa-xl-scrubber-brush-designer-buckets