Scrubber buckets with More clearance and Added design
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is 3mm thinner to provide more clearance between the bed and the buckets.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 22
- Makes
- 0
- Views
- 185
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a pretty simple remix inspired by @chylld. like them, I’ve added a different graphic to the front to add a little bit more flare. I’ve also reduced the width of the buckets by 3 mm to provide additional clearance between the print bed and the buckets as when I first attempted this, they caught on the undercarriage of the heating bed and bound up the Z axis. I’m fairly confident the bucket was not sitting correctly however for peace of mind, I still made the additional clearance.
I personally printed in PETG for heat resistance, though I’m imagining PLA would work just fine. Basically stock settings with additional walls for some strength as well as breakaway supports.
@chylld remix: https://www.printables.com/model/912291-prusa-xl-scrubber-brush-designer-buckets