Canyon FUEL bottle seals
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printed TPU seals to make these bottles actually watertight
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I bought water bottles for my new Canyon bike. Unfortunately they leak more water than water flows through the Niagara Falls daily.
So I made TPU seals for both the bottle cap and also replaced the drinking spout with a TPU part. The bottles now hold water and also don't leak air when squeezed, unlike before. The material I used is Fiberflex 30D, which appeared almost as soft as the stock silicone drinking spout.
The O-ring seal should fit all Canyon FUEL bottles, the spout only fits the bottles with the mud cap lid.
DISCLAIMER: Print and use at your own risk. According to my research TPU can be foodsafe, but this isn't a given. Also clean these parts thoroughly and regularly to avoid bacterial growth.