Canyon FUEL bottle seals
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printed TPU seals to make these bottles actually watertight
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 69
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
I bought water bottles for my new Canyon bike. Unfortunately they leak more water than water flows through the Niagara Falls daily.
So I made TPU seals for both the bottle cap and also replaced the drinking spout with a TPU part. The bottles now hold water and also don't leak air when squeezed, unlike before. The material I used is Fiberflex 30D, which appeared almost as soft as the stock silicone drinking spout.
The O-ring seal should fit all Canyon FUEL bottles, the spout only fits the bottles with the mud cap lid.
DISCLAIMER: Print and use at your own risk. According to my research TPU can be foodsafe, but this isn't a given. Also clean these parts thoroughly and regularly to avoid bacterial growth.