Lockheed JASSM AGM-158 Stealth Cruise Missile
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Makes an awesome desk display
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 522
- Wydruki
- 2
- Wyświetlenia
- 1468
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Standard Digital File License
Thanks to @trav_1593464 for letting me know that the holes for the pegs were left out of the original upload. The new 3mf has the holes in place.
General:
A model of the JASSM AGM-158 Stealth cruise missile by Lockheed Martin
Why I designed this:
I designed this to display at work on my desk
Printing notes:
Layer height: .15 or finer
Recommended Material: PLA
Supports: On wings only, 80° overhang threshold. Arachne slicing method.
Infill: 15% Gyroid or Rectilinear
Walls: 2-3
Other Modifiers: Print as oriented use a brim and supports on the wings. only
I printed from PLA on Prusa XL at .15 layer height with 15% rectilinear infill.
Other notes:
I found it nearly impossible to print fully assembled and maintain good quality. The split out model is highly recommended.
Once printed, use superglue to assemble with the included pins. Wings mount on the bottom and should be secured with a bit of superglue as well.
_____________________________________________________________________________________________________________
Don’t forget to follow me, post a make, leave a like, or tell me what you don’t like so I can make improvements.
Thanks, and Happy Printing!
Also check out: