Power Extension Box Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall mountable slide in holder that allows for easy fixture and removal of your RCD extension power box.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- GNU General Public License v2.0
A wall mountable slide in holder that allows for easy fixture and removal of your RCD extension power box. Attach to your wall or any surface with 10 gauge countersunk screws; I've added recessed flanges for the screw heads to sit in allowing your power box to slide in and out unimpeded.
Specifically suits the Clipsal 485P4CB30 (pictured), but can be scaled to suit any RCD power block of your choosing so long as it has an elevated flanged base. Printed in ASA with a 0.6mm nozzle (as that's what I primarily do my printing in), however with a 0.4mm nozzle 3-4 walls and 10-20% infill should be sufficient for any filament.
--FOR RESIZING PURPOSES--
The base dimensions of the Clipsal 485P4CB30 are 127mm long x 107mm wide x 10mm thick