Liczymy pasujące modele…
This is a snap on cover for a common light switch model in Australia (clipsal 2000 series). For use with smart bulbs with remote that require the light switch to always be left on. The .OBJ file is included so if any modification need to…
As featured in the video above! A Clipsal Classic / C2000 compatible wall plate for IKEA's BILRESA buttons & TIMMERFLOTTE sensor. Hardware Required & Assembly 2 x Countersunk M3x10mm machine screws Printing Instructions Material: PLA or…
As featured in the video above! A Clipsal Classic / C2000 compatible wall plate for IKEA's BILRESA buttons. Hardware Required & Assembly 2 x Countersunk M3x6mm machine screws Printing Instructions Material: PLA or PETG will work great.…
Australian Clipsal Single gang switch face plate. Designed to print in Glo-in-the-dark filament for locating switch easier in the dark. Also is great for customising a room. Print Settings Printer: Winbo SH155L Rafts: No Supports: No…
This set of 3D printable accessories is designed to fit the following Clipsal C2000 Series light switch covers : C2031VH – Single switch cover C2032VH – Double switch cover C2033VH – Triple switch cover These models have been designed to…
I needed a blank cover so that I could mount my Philips Hue switches over the top of the existing switches. Hopefully, this can come in handy for someone else that needs this for their house. Snaps on just like the normal switch covers.…
This is a simple model to house the Clipsal range of mechanisms such as ethernet jacks, HDMI ports, USB and other supported connectors or switches. It does not utilise the clips on the mechanisms, initially desgined for one that has…
Body of a Clipsal ControlLink Button mech. Can be used as the foundation for a custom mech that will mount into a Clipsal Iconic grid plate. Origin of the scad model is the centre of the button contact ring. Body of mech provided for…
This is a replacement Clipsal 2000 Series Flush Surround. Allowing you to create you own Surround in in different colours. There are others, but I found they were not a very nice fit, this is designed to match the factory fitment. There…
I needed to install a WT32-SC01 Plus device to replace an old outdated alarm panel. Thankfully some pre-existing models existed, but needed some finessing to work. I merged the two models, and added some space to include some double sided…
Migrating from thingiverse https://www.thingiverse.com/thing:4411669 Anti draft BackDraft stopper Adaptor for a 250mm Ceiling Extractor Clipsal AirFlow CE250 easily removable/swapable with the 150mm flexible duck Adaptor to remove Solder…
A simple set of Clipsal / Deta / HPM / clone compatible wall-plates, surface boxes, surface risers and accessories All models have been designed with a 1mm nozzle in mind, for smaller nozzles just increase the wall count to near 1mm for…
Removable cover for Clipsal iconic GPO's and switch plates. Cover can be fitted on all clipsal iconic 120 X 78MM plates with any combination of switch modules.
Replacement surround for australian Clipsal switches.
Migrating from thingiverse https://www.thingiverse.com/thing:4387788 Adapter to connect a removable 150mm flexible duck to a 250mm Ceiling Extractor to remove Solder / Flux fume. designed to be printed on a CR-10S PRO , so a 300X300 bed…
Install a Aqara Zigbee Button behind a Clipsal Iconic 40 Series plate for situations where you can't get power to the back of a plate.
Print back-down with supports for the spacing for the Clipsal switches. If you do not need that spacing, fill with a positive box sized to match.
This is to be used as the base for other smart switch mounts.
There wasn't a lot of love with the Philips Hue Tap Switch V1 (with the 3 smaller circular buttons), so I added the mounting plate for the AU Clipsal cover plate. (Philips Hue Tap Switch Mounting plate was not my design, but couldn't…
Button for a Clipsal 40 Series Iconic mech with Fan embedded.
This plate allows temporary mounting either one or three PDL/Clipsal Iconic series switch modules while you are painting or gibstopping. It holds them behind the finished wall level inside a regular sized gib/plasterboard cut-out, so the…
Clipsal 56 series are commonly used in Australia and NZ for industrial/outdoor/harsh environments. Print out of PLA or PETG in whatever colour you would like. Gaskets I printed out of 95D TPU Great to customise cutouts for different…
Fits standard 12mm momentary switches easily available from Aliexpress. I used these here, in 12mm, Momentary, Red, 110-220V. They are very low current and you can either wire across the relay terminals if you want the light to be OFF…
Clipsal missile switch so FUN!!!!!!!!!!!!!!!!!!! and V2 IS OUT I CHANGED ALL THE FILES (kinda because the person i remixed from said to not put files that were not changed in the remixing but also because the files didn't work for clipsal)
Clipsal 56 series are commonly used in Australia and NZ for industrial/outdoor/harsh environments. Print out of PLA or PETG in whatever colour you would like. Gaskets I printed out of 95D TPU Great to customise cutouts for different…
Australian Clipsal Dual gang switch face plate. Designed to print in Glo-in-the-dark filament for locating switch easier in the dark. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 100% How I Designed This Designed with…
Unable to get a replacement clip for a Clipsal brand Oyster Light, I created this one, hopefully it gets someone else out of trouble. The specific model light that I made it for is CF32, but I'm sure there is plenty of other similar…
Designed to mount Adafruit BME680 dev board behind a Clipsal 40 series plate. Could be used for other gas sensor mounts.
Add personality to your wall switch instead of the typical colour that's on the retail store, typically black, white, beige, grey. How about colour code the switch to indicate light such as blue, green for ceiling fan? How about adding…
