Clipsal C2000 Light Switch Cover Accessories – C2031VH / C2032VH / C2033VH
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Accessories for Clipsal C2000 switch plates (C2031VH–C2033VH). Ideal for smart mods, labels, or protection.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 129
- Wydruki
- 0
- Wyświetlenia
- 449
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This set of 3D printable accessories is designed to fit the following Clipsal C2000 Series light switch covers:
- C2031VH – Single switch cover
- C2032VH – Double switch cover
- C2033VH – Triple switch cover
These models have been designed to snap-fit or align neatly over the standard Clipsal wall plates, commonly found in Australian homes and offices. Perfect for custom switch labelling, tactile enhancements, child-proofing, or smart home mods.
Recommended Print Settings
- Material: PETG (recommended for durability, slight flex, and heat resistance)
- Layer Height: 0.2mm
- Nozzle Size: 0.4mm
- Infill: 15–25% (depending on model variant)
- Supports: Not typically required (depends on design variant)
- Orientation: Print face-down for best surface finish
Compatibility Notes
Designed specifically for Clipsal C2000 series (C2031VH, C2032VH, C2033VH) wall plates.
Check tolerances after printing – PETG shrinkage is minimal, but slight variances can affect snugness.
Models may include: cover plates, switch labels, button guards, spacers, or sensor mounts (if specified in model).